Pages

Tuesday, November 22, 2011

Self test at your printer

Self-test is done to the printer's own maintenance, as well as to know the condition of the cartridge, is still in good condition or not. So that it can be treated as early as possible so that the cartridge did not experience severe damage. This was done at least once a week, especially printers rarely used, although this is not any rules of each printer.
Here's how to self test the printer and how it differs from the one with the other.
ReadMore...

Reset Canon i320, i255

Canon i320, i255 
Reset Waste Ink Counter.
Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power. 
4. Close door, then release power button or 
Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer. 
3. The indicator (L.E.D.) should be green. 
4. Press and release the RESUME button, the indicator (L.E.D.) should be orange. 
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 
6. Release both buttons. 

Step 2: Software for Permanent 
1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) and it should be reset.
ReadMore...

Reset - HP Deskjet 3920 Color Inkjet Printer

The Print Carriage is Stuck and Won't Move
HP Deskjet 3535, 3744, and 3920 Color Inkjet Printer

Issue

If the printer fails to print, the Power light is blinking, a Mechanism Error is displayed on the computer, or the print cartridge carriage won't move back and forth across the printer, the carriage may be stalled.

Solution
Follow the steps below.
ReadMore...

PROGRAM RESETTER MP258 error 5B00 or error P07

PROGRAM RESETTERMP258 error 5B00 or error P07 


ReadMore...

Printer Problem Solving

There are many problems with printers, including HP, Canon, Epson, etc..
There are times when a printer problem we can handle in a simple but there are also forced to be brought into the service.
For example,
Hp Printer blinking will not print!
The trick is quite simple,
1. Turn on the printer and open the lid
2 Remove all cartridges ..
ReadMore...

RESET CANON PIXMA IP1800 WITH IPTOOL SOFTWARE

How Reset ink level cartridge Canon Pixma iP1800 With iPtool software ?, I get this tutorial as a forum to resolve the error fixyourownprinter.com ink level on canon PIXMA iP1880 Pixma iP1800/Canon. This problem usually occurs after completing the canon printer cartridge and ink-level indicator that shows the ink cartridge is empty, although they have filled a cc of ink into the cartridge. And if the problem occurs you can not use the printer for printing. The solution should be to restore the level of ink in the printer if you want your computer to work again. 
ReadMore...

Printer Canon Pixma MP258 – Error P08

First time, I found the problem Canon Pixma MP258 printer will not print from the cpu or the Copy Scan and P08 are the error messages on the printer panel. I could maybe try to reset, e turned out to be, then I created to copy directly, it was also error.

I've lost both cartridges, the ink was discharged, directly, I refill the black  and a color cartridge. Then I do a test print and the result is smooth and good wow.
ReadMore...

RESET CANON MP140 - MP145 INK LEVEL COUNTER (MANUAL - SOFTWARE RESETTER)

How to reset ink level counter Canon Pixma MP140 or MP145 ? we can use manual reset or software resetter, The Canon PIXMA Pixma MP140,  MP145 printer is a popular desktop color house that also serves as a scanner, copier. In some cases, the printer may not realize that you have installed a new ink cartridge but not reset the ink levels. With the reset function of the  Pixma MP140,  MP145, you can restart the unit and normal printing.
ReadMore...

Free Reset - Canon ip1700

Reset - Canon ip1700  &  ip1300

Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer. 
3. The indicator (L.E.D.) should be green. 
4. Press and release the RESUME button, the indicator (L.E.D.) should be orange. 
5. Press and release the RESUME button again, the indicator (L.E.D.)
ReadMore...

RESET CANON IP2770 MANUAL - RESETTER SOFTWARE

How to reset Canon ip2770 ? and where i can get  Canon ip2770 Resetter?
A few days ago, is a friend who sends me download links for Canon ip2770 Resetter. The software resetter Canon ip2770 original software but not on my team.

He asked for help to find someone who can break this software. If you can break this software or want to try it, you can download the Canon ip2770 Resetter at the following link:
I found tutorial "How to Reset Canon ip2770 against" Forum Thailand printer. This tutorial to answer all questions about all software resetter Canon iP2770 and I hope this tutorial information can help all visitors of this blog that need re
ReadMore...

Free Reset - Canon iP1200&ip1600

Canon Pixma ip1200&ip1600 
Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer. 
3. The indicator (L.E.D.) should be green. 
4. Press and release the RESUME button, the indicator (L.E.D.) should be orange. 
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 
6. Release both buttons. 

Step 2: Software for Permanent 
1. Reconnect the printer cable.
2. Open General
ReadMore...

How to Reset Ink Level Canon iP1880, IP 1100, iP1800 and iP2500 series

How to Reset Ink Level Canon iP1880, IP 1100, iP1800 and iP2500 series
Here the tutorial to reset Canon Pixma iP1880 series by manual. The following reset method has tested and work perfectly to reset waste ink counter.
ReadMore...

E27 & E13 on the printer Canon Pixma MP198

E27 message on the printer Canon Pixma MP198
The first time you reset canon pixma mp198 printer, I tried to use reset mp145 way, I think the problem could be resolved, it can not, yes it's time to die internet again. So could not the same asked google grandparents.
It turned out that in addition to the manual reset once (who Temporary) must also software reseter mp198.
After reset is complete there is a problem arising again E13 message, do not search the existing list of E13 was not the cause, after the meet was just a resume or e-stop button / reset button is more or
ReadMore...

How to Reset Canon MP145 waste ink counter

These are the step How to Reset waste ink counter (error E16) :
 
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let both of button and printer in to SERVICE MODE
4. Printer will be charging
5. After printer finish charging, ush STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ReadMore...

CANON PIXMA IP2770 - ERROR 5200

printer ip2770 lamp indicator is standby but, when I try to print my job via my pc this printer error 5200 and lamp light blinking continuously green to orange. Please help me, for resolve permanent my problem?
Alternative for this printer work again (only temporary):
ReadMore...

HOW TO RESET A CHIP ON CANON CLI-8 CARTRIDGE

How to Reset a Chip on Canon CLI-8, Canon CLI-8 ink cartridges come in black and color varieties. CLI-8 cartridge is used in a wide range of inkjet printers Canon. You can recharge these ink cartridges when they run low, as an alternative to buying new cartridges. Each cartridge has a chip embedded in it tracks how much the cartridge is used to let you know when empty. Cartridge refilling CLI-8 should be reset with a chip resetter for the Canon printer to recognize it as a complete round.
ReadMore...

HOW RESET IP 3330 CANON PRINTER

How to Reset a Canon IP 3330 PrinterCanon IP 3300 The line of inkjet printers, including the 3330, specialize in printing high-resolution photographs. If the printer has stopped working properly and have tried other methods of solving problems, you may need to reset the device to factory settings. This process involves using the control buttons on the front of the printer to enter the service mode and reset, after the EEPROM (electrically erasable programmable read only memory) that stores all the configuration settings printer.

Instructions 
ReadMore...

HOW RESET INK LEVEL CANON MP198 (MANUAL - SOFTWARE RESETTER)

How to manual reset ink level Canon MP198 ? and where i cant get Canon MP198 software resetter ?
Restore the level of ink in a Canon MP198 multi-function, is required when a warning message appears on the screen. Many printers communicate with a computer using software provided by the manufacturer. This allows the printer to tell the computer when the ink level of one or more ink cartridges are low. To reset the ink level of the printer you must first verify the current level of the ink and then run a manual reset.

Instructions
Check the ink level
ReadMore...

HOW RESET CANON PIXMA MP520

How to reset Canon Pixma MP520 ? This reset procedure for Canon Pixma MP520 is taken from BilBg (Bulgaria) fixyourownprinter forum post, the procedure to reset the counter of the Canon Pixma MP520 with combinations of buttons. Some users in this forum that have tried this method (method of Canon MP520 reset) say that this way of working with Canon MP520.
ReadMore...

HOW RESET CANON PIXMA MP250 CARTRIDGE

How to Reset a Pixma MP250 Cartridge ? Canon Pixma MP250 printer will recognize the ink cartridge past the expiration date of the cartridge. This is true even if there is still usable ink remains in the cartridge. Resetting the printer will solve this problem by turning back the expiration date associated with the cartridge. Performing a hard reset of the printer also solve problems such as the printer does not recognize the ink cartridge, error messages saying that the ink cartridge is not installed correctly, and other problems associated with filling the ink cartridge.
ReadMore...

HOW RESET CANON IP6600D AFTER REFILLING CARTRIDGES

How to Reset an IP6600d After Refilling Cartridges ? The ink cartridges the printer uses inkjet Canon iP6600D have electronic counters on-chip cartridges. Starts the meter in a large number and counts down to zero with each item printed. When the counter reaches zero, the printer assumes that the cartridge is empty, even if it is filled with ink. refilled cartridges have to reboot to start selling again.
ReadMore...

HOW RESET CANON IP1900 AND IP1980 INK LEVEL

How to reset ink level canon Pixma iP1900 or Canon iP1980 cartridge ? Although the Canon Pixma iP1980 resetter software or Canon Pixma iP1900 resetter series not available on the Internet now. No means no way to reset the printer series. My opinion Canon PIXMA IP 1980 is the new version of Canon Pixma iP 1880 by what m├ęthode reset for canon ip 1880 can be applied to re Canon iP1980. I also tried to reset for Canon iP1700 methode that is a work in several Canon iP1900 Printer series.

In case of permanent reset after doing the manual reset restter to use software. software resetter as iPtool and general tool for
ReadMore...

HOW RESET CANON IP1800 PHOTO INKJET PRINTER

How to Reset the Canon iP1800 Photo Inkjet Printer ? Learn how to reset the printer can save you from hours of excruciating troubleshooting roundabout. Reset or restart the system, a printer clears the system error and restores the device to normal operation. Although it is possible to reset the printer software (the software for monitoring the printer), focusing on the first hardware (the printer itself) will save you time and effort. The next time your Canon iP1800 Inkjet Photo Printer is not properly run commands
ReadMore...

HOW RESET CANON CLI-8 CARTRIDGE ON CANON PRINTER

How to Reset a Canon CLI-8 Cartridge,
Canon CLI-8 cartridges come in black, yellow, magenta and cyan varieties. Each of these cartridges can be refilled with ink when they become low. When a CLI-8 ink cartridge is refilled, the chip on the cartridge should be adjusted to what the printer does not treat the cartridge as empty. Reset cartridge sales changes in the
ReadMore...

HOW RESET BLINGKING CODE CANON IP1300, IP1700, IP1200, IP1880, IP1980

How to reset blingking code for Canon IP1300, IP1700, IP1200, IP1880, IP1980 ? when we using Canon iP1300, iP1700, iP1200, IP1880, IP1980 we usually Having problem with blingking on Canon iP1300, iP1700, iP1200, IP1880, IP1980. Signal appeared to be only led to flash. Following a problem printing solutions marked with flashing LED.
ReadMore...

CANON PIXMA IP6600 CISS INSTALLATION INSTRUCTIONS

Canon Pixma iP6600 CISS Installation Instructions, The PIXMA iP6600 CISS or Supply System Continuous Ink is a photo printer developed and marketed by Canon. The installation disc that came with the printer controls the process of installing the printer. You may need administrative rights to perform the installation procedure.
ReadMore...

CANON PIXMA iP5200R (FEATURE - RESET)

Canon PIXMA iP5200R. Wi-Fi high-performance home photo printer, Quick and easy wireless printing, Enjoy fast printing and easy home wireless  PIXMA iP5200R. Wi-Fi connectivity lets you share any printer, without clumsy cables. Setup is simple with the Network Setup Wizard.
ReadMore...

Canon Pixma iP3000 (FEATURE - RESET)

Canon PIXMA iP300, A great value with all the features of the printer for home and small office, image with all the features of the printer and the document, The PIXMA iP3000 offers the flexibility and performance of more expensive printers. radical style allows for a wide range of advanced features to be packed in an attractive unit that saves space. Easy to place anywhere and effortless to use, this printer meets all your photo and document printing needs perfectly.

Photo lab-quality photo
Enjoy true colors, fresh and delicious.
ReadMore...

Wednesday, November 16, 2011

Reset Samsung SCX-4300 tools

SAMSUNG SCX-4300 is small and still strong. Despite the dimensions of x 14.25 "x 9.10" his diminutive 16.00 mm cranks, 600 x 600 dpi documents with a rate of 19 ppm. There is also a monthly cycle of 10 000 pages. SCX-4300 is flexible, with a personal card, AutoFit, N-up, branches and poster copy modes. And rich matte black finish gives a contemporary feel to your workplace. With the SAMSUNG SCX-4300 is not difficult to imagine. But how to ResetCounter it? It is here

ReadMore...

Reset Samsung SCX 4600

Samsung SCX-4600 and supplying full-use printing functionality, printing, copying and scanning in colour-SCX-4600 series offers a set of functions to make you more productive. Key among them is the print screen function of SCX-4600, which allows you to print what you see on the screen at the touch of a button. And here are the steps to reset the counter:

ReadMore...

Reset Samsung ML 1660

Now, have not gotten any Samsung ML 1660, but I have a method to restore the page counter, Samsung ML 1660 for you. So, you must do this with your own risk. Remember, do not turn off your printer when reflashing. Please try as below:

ReadMore...

Reset Epson Stylus T11, T13

We posted an article about hard reset for the T11 by hacking to reset the counter chip. But it is not appropriate for the new end-user, here in this way, you can do with the software (program for adjustment, OrTHoTaMiNethanked).

ReadMore...

Methods to reset the HP printer support message

To clear the message for the service for maintenance of the LCD display of the following HP printers: HP IIISi, HP 4Si, HP 5Si, HP 4000/4050/4100/5000, HP 4101MPF, HP 4100MPF/4200/4300, HP 4240/4250/4350, HP 4500/HP 4550, 8000/8100/8150, HP 9000 printers.

ReadMore...

Full recovery of the waste ink tank for the Canon i80

Some of the product line have a special way, we call "hard reset". Canon i80 was once so that you do not need any software, you can try it easilly on your printer. Make your sea

Close the print head cover and turn off the printer. button resume/cancel, press the power button (Do not release the buttons until the LED lights in green) while holding the power button, release the buttonWhile renew/cancel holding the power button, press the resume/cancel three times and then release the buttons and
ReadMore...

Clear waste ink pad counter with correction of Epson

Adjustment program (known as AdjPro) is the best tool for epson Inkjet printer user (pen and photo). Where the light on the status of your  printer is this. Your printer must clear or reset the counter to zero. This is a common method can use any version of the Epson Stylus Photo printer or AdjPro (each model of the printer has its own AdjPro version is not the same for all AdjPro)

ReadMore...

Adjustment programme for Epson T50 and T60

Epson Stylus Photo T50, new epson printer with fast effect and cheap printer. You can feel free of the mind with CIS (continue to ink system), but is something you must do this counter is reset. And now, what will you need? Step 1: download the programme for the adjustment fo T50 (at the end of this post)Step 2:step by step "How to use Epson Adjustment Program" And clear adhesives Panel to reset the counter.

ReadMore...

Reset Samsung SCX-4623F

Many of the recommended by RC (Reset counter) user, this article will help to reset the counter for SCX-4623F


1-remove the toner cartridge from the printer and disconnect the USB cable to the printer.
2-turn off the printer.
3 to Turn on the printer, when you press the button "Stop".
4-we see a download.
5-click again to stop the "stop".
6-Wait seems image1.
7 to connect the printer to a computer with a USB cable.
8 – wait until the screen message "new equipment is installed and ready for work."
9-click the file "dwnl4600" file to start, or you can drag the file "FIX_SCX4623_V 2.01.00.93. hd" and drop to "usbprns2 .exe"
10 – wait until the printer will restart.
11 – Ready, number of page of the report must bring the following information-100% of the remaining resources and 2.5 K. 12 – no need for repeated procedures, where the printer is turned off, will return to this page count.

ReadMore...

Thursday, November 10, 2011

Reset Canon Printer ink cartridges

Instructions
1.  Turn off the printer, unplug the power cord and disconnect the USB cable from the computer.
2.  Press and hold the "Power" and "Resume" buttons and plug the power cord into the outlet to begin printer initialization.
3.  Release the "Power" button (while still holding down the "Resume" button) and then press and hold the "Power" button to activate test mode.
4.  Release the "Power" and "Resume" buttons to activate service mode. Wait for the lights to stop flashing.
5.  Press the "Resume" button to cycle through the settings until the message "Reset waste ink counter" or "Ink count" is displayed (press three or four times).
ReadMore...