Pages

Wednesday, November 16, 2011

Methods to reset the HP printer support message

To clear the message for the service for maintenance of the LCD display of the following HP printers: HP IIISi, HP 4Si, HP 5Si, HP 4000/4050/4100/5000, HP 4101MPF, HP 4100MPF/4200/4300, HP 4240/4250/4350, HP 4500/HP 4550, 8000/8100/8150, HP 9000 printers.


HP IIISi printer:

Press Online, while the light is offHold PCL CONFIG menu until the MENU key until the MENU appearsPress SERVICE MSG = h * appearsPress + or-key to change the display of SERVICE MSG = OFFPress ENTER/RESET MENU key to turn off the message * must appear and press online

HP 4Si printers:

Press Online, while light passing offPress MENU until appearsPress this menu to configure the key to the service MSG = h * appearsPress + or-key to change the display of SERVICE MSG = OFFPress press ENTER to turn off the message * must appear and press online

HP 5Si printers:

Press the MENU key 4 times to configure MENUPress ELEMENT to display a message for ENTERPress online SERVICE = OFFPress

HP 4000/4050/4100/5000 printers:

Plug the printer offHold downwards from the left side of the item and value +/-keys, turn on the printer and wait until the display reset COUNT for maintenance, and then release the keys

HP printer: 4100MPF/4101MPF

While holding down the Start button, turn on the printer 3 LEDs will Flash naS?vetaotnosno, and then stay illuminated (release the Start button at that time), press the up arrow. Display will read MAINT COMPLETEPress check button once and the counter of the online maintenance is resetReturn

HP 4200/4300 printers:

Turn on the power offHold printer, select and plug the printer power. Continue holding the choice for a few seconds until all 3 printer control panel lights flash once and then remain (this may take up to 10 seconds), use the up arrow key to scroll to the new support KITPress, select to reset the counter for maintenance kit

HP 4240/4250/4350 printers:

Turn off the power of the printer, and then onWhen 000 MB (the beginning of the number of memory) appears on the control panel display, press and hold down the SELECT (change the button). Continue hold SELECT while all 3 printer control panel lights flash once and then remain in (this may take up to 10 seconds) and press release, CLICK the up arrow to go to the new MAINTENANCE KITPress select to reset the counter for maintenance kit

HP 4500/4550 printing:

Plug the printer offHold CANCEL the JOB and select keys and turn on the printer, and then wait until the display becomes blank, and the three LEDS come onPress on the right side of the key from the menu, and then click Select keyYou will enter the mode of the service after the normal test completesPress, a key ELEMENT, while the FUSER MAINTENANCE GRAF appearsPress value to change the zeroPress select to savePress GO; The printer must be returned to the READY

HP 8000/8100/8150 printers:

Press the menu button until the display reads CONFIGURATION MENUPress button ELEMENT until the display reads message SERVICE = ON/OFF * click SELECT OFFSelect to offHold for the saveTurn printer, buttons, and ITEM value minus minus turning the printer back on hold until the display reads RESET MAINT/COUNTand then release both buttons

HP 9000 printers:

Plug the printer offPress and hold examination of keyPower of printerRelease, return verification key after all three lights on the display should read SELECT LANGUAGEPress arrow until MAINTENANCE KIT is displayed, press the check again, and the number of sets of support