Pages

Wednesday, November 27, 2013

Epson Stylus TX700W Printer Driver and Resetter

a. Epson Stylus TX700W Printer Driver is installed first, and make sure that the printer is connect to the computer
b. Make sure you have the "Software Resetter Printer Epson Stylus TX700W"
c. Make sure that the damages requested in the printer reset counter (usually a red flame of the lamp on the printer all)
Here is a tutorial resetter Epson Stylus TX700W:
One. Prepare the Epson Stylus TX700W Adjustment Software on your computer
2. If the software is compressed, the software used to extract his resetter Epson TX700W
3. Turn on the Printer
4. Open the folder resetter Epson Stylus Photo TX700W Adjprog.exe you and run the file.
5. Click Accept
6. Click Particular adjustment mode menu entry to reset the counter printeradjustment Epson tx700w
7. Find and click the Consumables menu maintenance counters, and then click OK
8. Put a check in the Main countre and Platen pad pad counters, and then click Check to find out the counter value at the time of blinking, and Ok to continue

Click initialization to change / reset the printer counter becomes zero, so the printer to be normal again. Then click OK to continue
9. Click Finish to end the process of resetting the counter Epson TX700W
10. Click Previous to return to main menu
11. Click Quit to exit the program counter reset Epson TX700W
12th. Reset waste ink counter Epson TX700W already done, turn off the printer for a while, then restart the printer, and wait until the printer calibration is completed